For you to keep the air conditioner in top shape during the hot months of the year you need to do a number of things. Read the things you should do as given by air conditioning repair professionals:
Fix the sinking air conditioner pad
If you have been having your air conditioner for a long time, it’s common for the concrete pads under the air conditioner and heat exchanger to settle over time. You don’t have to worry when the pad has simply sunk and there is no strain on the copper coolant tubes and electrical lines.
While this is the case, you have something to worry about when the pad continues to sink and pulls the lines tight. You also have to worry when there are water puddles around the unit. If this is the case with your unit, you should think about fixing it.
Shift the pad if it isn’t too old or damaged. If damaged, you don’t have any other way out other than to buy a new one.
Add an in-line duct booster fan
You should consider getting this when you are already using a forced-air air conditioner and still the house is hotter.
When you add a duct or vent booster fan, you increase the flow of cool air into the room. The fan fits inside the duct. To get the most from it, mount the fan near the outlet.
Two of the most common booster fans that you can go with are vent and register fans. Both of these fans sit directly on top of the floor, ceiling, or wall registers.
Depending on the model that you get, you can set it to operate automatically or control it with a switch or remote control.
If you have the skills you can install the booster fan by yourself but if you have never done it before, you have to hire an AC professional to help you out.
Unclog the condensate drain tube
A tell-tale sign of a clogged condensate drain tube is water pudding around the furnace while the AC is running. Condensation from the air conditioning coils contains bacteria. When you go for a long time without cleaning the coils, the bacteria form slime that clogs the condensate pan drain pipe.
A clogged pipe makes the air conditioner work harder than it should. It also makes the unit consume a lot of energy and at the same time have a shorter lifespan.
For you to keep the air conditioner functioning optimally, clean the pipes regularly. You can use tablets to clean the pipes or hire experts to help you out.
Install a whole-house fan
Whole house fans have been used to cool houses for centuries. Invest in a fan and install it in the attic. The fan pushes hot air out through the attic vents and draws cooler, outside air into the house through open doors and windows.
When you invest in a large fan, it will get rid of hot air in the house in two to three minutes. By doing this it not only removes the built-up heat, but it also gives your house a pleasant breeze and smell.
Make use of the windows
A lot of heat gets into the house through the windows, especially when they are open. This means that they are quite handy when it comes to controlling the heat in the house. To prevent your air conditioner from working too hard, keep them closed all the time.
You can also cover the windows facing the sun with drapes or blinds.
Take a look at the insulation
Is the house properly insulated? You need to think about this. If your air conditioner is functioning inefficiently you can easily improve its efficiency by replacing the damaged or rotten insulation around the AC lines.
Unless you are highly experienced at doing this, you should leave the work to an expert AC repair services McLean provider.
